China Kitchen Drop in Sinks are an older, more traditional style. Just as the name implies, they are dropped in from above into a cutout in the countertop, rather than mounted underneath. The lip of the sink rests on top of the counter. We have had customers select a top mount sink in new construction for two reasons. 1. They like more of the stainless showing. 2. There is no way to chip the edge of the granite around the sink. If you have an undermount sink, check the edge around your sink.
Although most China Kitchen Drop in Sinks are square or rectangular, the shape isn't a limiting factor. It's easy to find an oval or round one for the bathroom and dual kitchen sinks with basins of different sizes. As far as utility and ease of cleaning are concerned, any shape works as well as any other, as long as the hole in the countertop can be cut to fit the sink. If you buy a counter with a precut hole, you have to use a sink with that shape and size.
Installation Procedure of China Kitchen Drop in Sink
Installation of any sink necessarily involves some plumbing tasks, including installing the drain and the faucet, and if the plumbing isn't your thing, you're going to need a pro for those jobs. When it comes to dropping in the sink, the toughest part of the job is cutting the hole for it. Most sinks come with a cutting template to make this job easier, but cutting through some materials, such as stone, composite material, or laminates is a job best done by someone with the right tools and the skill to use them properly.
Just before you drop the sink into place, manufacturers recommend laying a bead of silicone caulk around the circumference of the hole. This helps prevent water from seeping under the rim. You'll also want to caulk the outer edge of the rim after installation is complete and you've tightened all the clamps to keep dirt and water from getting underneath.
The sink has to be level, or water will pool in the bottom and won't go down the drain. Check the level of the countertop and make any necessary corrections before installing the sink. Once you've done this, all you have to do to level the sink is to make sure the rim sits flush against the countertop on all sides. If there's a wider gap on one side than the other, this usually means that the hole is too small and needs to be widened slightly.
Description of undermount stainless steel commercial sink bowl:
Export country:All of the world
Stainless steel 304,18/8 chrome -nickle content, 201ss
Surface Treatment:Electrolysis polished
Tap hole and overflow hole is available
Feature of the stainless steel commerical kitchen sink:
Packing details as belows
|600mm x 500mm x 320mm||1.0mm or 1.2mm|
|600mm x 500mm x 300mm|
|600mm x 450mm x 300mm|
|550mm x 500mm x 300mm|
|500mm x 500mm x 300mm|
|500mm x 500mm x 250mm|
|500mm x 400mm x 300mm|
|500mm x 400mm x 250mm|
|450mm x 450mm x 250mm|
|400mm x 400mm x 300mm|
|400mm x 400mm x 250mm|
|400mm x 400mm x 200mm|