 |
SPSS-605032
7324100000
Ningbo, China
3000PCS/Year
T/T, Western Union
by Carton or by Pallet
SPSS-605032
Polished
One
Mental
Undermount
304 Stainless Steel
1.0mm
Deep Drawing
Electrolysis Polished
no
by Carton or by Pallet
600*500*320mm
China
7324100000
Stainless steel
Under Counter Sinks
Rectangular
Single Sink
Single Bowl
Without Faucet
Product Description
SHIONP is China kitchen drop-in sink supplier, providing high-quality China commercial stainless sink, kitchen drop in sink, and work table with sink.
This China kitchen drop-in sinks offer a 304 stainless steel construction for its top, bowl, and backsplash. Durable construction makes it a perfect addition to busy kitchens, auto shops, janitor closets, or industrial locations. Even with heavy, everyday use, it will prove a reliable addition to any facility.
Installation of any sink necessarily involves some plumbing tasks, including installing the drain and the faucet, and if the plumbing isn't your thing, you're going to need a pro for those jobs. When it comes to dropping in the sink, the toughest part of the job is cutting the hole for it. Most sinks come with a cutting template to make this job easier, but cutting through some materials, such as stone, composite material, or laminates is a job best done by someone with the right tools and the skill to use them properly.
Just before you drop the sink into place, manufacturers recommend laying a bead of silicone caulk around the circumference of the hole. This helps prevent water from seeping under the rim. You'll also want to caulk the outer edge of the rim after installation is complete and you've tightened all the clamps to keep dirt and water from getting underneath.
The sink has to be level, or water will pool in the bottom and won't go down the drain. Check the level of the countertop and make any necessary corrections before installing the sink. Once you've done this, all you have to do to level the sink is to make sure the rim sits flush against the countertop on all sides. If there's a wider gap on one side than the other, this usually means that the hole is too small and needs to be widened slightly.
Size: 600*500*320mm
Thickness: 1.0mm/1.2mm
Export country: All of the world
Stainless steel 304,18/8 chrome-nickel content, 201ss
Surface Treatment: Electrolysis polished
Installation Type: undermount
Tap hole and overflow hole is available
| Available size | Thinckness |
| 600mm x 500mm x 320mm | 1.0mm or 1.2mm |
| 600mm x 500mm x 300mm | |
| 600mm x 450mm x 300mm | |
| 550mm x 500mm x 300mm | |
| 500mm x 500mm x 300mm | |
| 500mm x 500mm x 250mm | |
| 500mm x 400mm x 300mm | |
| 500mm x 400mm x 250mm | |
| 450mm x 450mm x 250mm | |
| 400mm x 400mm x 300mm | |
| 400mm x 400mm x 250mm | |
| 400mm x 400mm x 200mm |
Other design
