You are here: Home / Products / Commercial Kitchen Sink / Drop in sink / Single Drop in Kitchen Sinks
Share to:

Single Drop in Kitchen Sinks

Stainless Kitchen Sinks Drop in also called an overmount kitchen sink or self-rimming sink, is the most common type of commercial restaurant sinks. A single basin drop in the kitchen sink has a visible lip around its perimeter that rests flat on the countertop. The sink basin drops straight into the countertop cut-out, and the perimeter lip holds everything in place.

  • SPSHW-R40
  • 7324100000
  • 5000PCS/Month
  • L/C, T/T, Western Union, Paypal
  • by Carton or by Pallet
  • Stainless steel 304,18/8 chrome -nickle content
  • 1.0mm
  • Deep Drawing
  • Electrolysis Polished
  • 1PCS/Carton
  • 30 Days
  • 400*400*900MM

Product Description

Stainless Kitchen Sinks Drop in are an older, more traditional style. Just as the name implies, they are dropped in from above into a cutout in the countertop, rather than mounted underneath. The lip of the sink rests on top of the counter. We have had customers select a top mount sink in new construction for two reasons. 1. They like more of the stainless showing. 2. There is no way to chip the edge of the granite around the sink. If you have an undermount sink, check the edge around your sink. 

Installation Procedure of Stainless Kitchen Sinks Drop in

Installation of any sink necessarily involves some plumbing tasks, including installing the drain and the faucet, and if the plumbing isn't your thing, you're going to need a pro for those jobs. When it comes to dropping in the sink, the toughest part of the job is cutting the hole for it. Most sinks come with a cutting template to make this job easier, but cutting through some materials, such as stone, composite material, or laminates is a job best done by someone with the right tools and the skill to use them properly.

Just before you drop the sink into place, manufacturers recommend laying a bead of silicone caulk around the circumference of the hole. This helps prevent water from seeping under the rim. You'll also want to caulk the outer edge of the rim after installation is complete and you've tightened all the clamps to keep dirt and water from getting underneath.

The sink has to be level, or water will pool in the bottom and won't go down the drain. Check the level of the countertop and make any necessary corrections before installing the sink. Once you've done this, all you have to do to level the sink is to make sure the rim sits flush against the countertop on all sides. If there's a wider gap on one side than the other, this usually means that the hole is too small and needs to be widened slightly.



Name: Stainless steel sink/stainless steel hand wash sink/commercial sink bowl/ catering sink bowl/ kitchen sink/hand washing sink/Stainless Steel sink unit

Item No: SPSHW-R40
Material Stainless steel 304,18/8 chrome -nickle content
Size 400*400*900mm
Thickness 1.0mm
Export country All of the world
Surface Treatment Electrolysis polished
Installation Type Undermount
Numble of  hole  One 

Description of undermount stainless steel commercial sink bowl
Water Flush Activated by Foot Pedal;
Tap hole and overflow hole is available

Other design



Contact Us Now

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.
 Factory-direct Connectivity Solutions.
 High quality, Competitive Price.
 Custom-tailored solutions.
 Problem-solving approach.

Contact Us
 TEL:
0086-13505740633 / 0086-18968283993
 ADD:
Rm704, Aux Building, No.757 Rili Middle Road, Yinzhou District, Ningbo, China.



Contact Us
​Copyright 2020 Shionp Industry Co., Limited . Sitemap