China adjustable table legs stainless steel are made from plastic material in black. It is adjustable type cabinet cupboard foot plinth legs. Easy to install. Updates your furniture with this leg. Mount the socket onto the base of the cabinet using the 15mm dowel to locate the correct position. Orient the tab to support the end panel of the cabinet if required and secure the socket with screws provided. Insert the cabinet leg into the socket and adjust to the desired height. Separate the plinth clip and bracket. Screw the bracket to the plinth in the desired location. Slide clip into bracket and clip onto the cabinet leg.
The unique "saw tooth" thread gives each leg an amazing rating of 330 lbs.! Think about the math for a minute. This means a typical 10 foot run of cabinets will support 3,300 lbs!
Keeps Moisture Away
No matter what the locale, these legs will keep any potential moisture far away from the wood. Plus, now you'll have extra room to run plumbing, ducting, etc.
Easy to Install
Just use an adjustable square to ensure a uniform set-back from the front of the cabinet, and attach each leg with the 4 screws that are provided. Be sure to locate each leg so it lines up with the cabinet sides, for maximum strength (otherwise you're relying on the strength of the assembly screws).
Even Easier to Adjust!
Just turn them with your fingers to the desired height. In tight spaces (like the back corner of a cabinet where your fingers might have limited room), use the leverage of a flat-bladed screwdriver to turn them by taking advantage of the 5 build-in slots in each foot.
Material: 201/304 stainless steel
Surface processing: Light, Sanding
Dead Load: 800KG
Range of application: Dishwashers, induction cooker, the Snack car
Adjusting range: 280-320MM
Packaging & Delivery
|Packaging Detail:||One polybag per pc/25 cartons per carton/ 50-60 carton-boxes on each pallet/ covering with moisture-proofing film/ and finally belt fixed for strong protection|
|Delivery Detail:||3~5 weeks after receiving the deposit payment|
1. Customer OEM or ODM is available.
2. Welcome for factory visiting for direct discussion.
3. FOB Ningbo or Shanghai, or CIF are available.
4. Good quality, favorable price, and strong service backup.
5. Certificate of Origin available for customs clearance.
Similar products and drawings: